Key takeaways
- The September 22, 2026 update added the Crosshair/Scopes tab and made Dynamic Quad the default crosshair (Valve)
- Crosshair length, thickness and gap are now pixel values that rescale automatically when resolution changes (Valve)
- Valve changed the share code format on September 30, 2026, adding scope dot size and color to codes (Valve)
- donk, sh1ro and b1t all use a green Static Cross at length 2, thickness 2, gap 1 (ProSettings.net)
- In 809 pro codes, 30% use green, 25% cyan and 7% yellow; only 8% use an outline (csdb.gg community data)
CS2 crosshair codes changed in fall 2026: Valve rebuilt crosshairs on September 22 around pixel sizes and a new Crosshair/Scopes settings tab, then changed the share code format again on September 30, so many older "CSGO-" codes now import wrong or fail. The most reliable way to copy a pro today is to enter the pixel values from a current settings page. Nearly every top player uses a small Static Cross with no dot or outline; donk, sh1ro and b1t all use length 2, thickness 2 and gap 1 in green. This guide lists current pro crosshairs, console lines to recreate them, how importing and sharing works now and what each setting does.
Checked against Valve's Counter-Strike 2 release notes from September 22, 2026 to the November 19, 2026 update and ProSettings.net pro player pages (updated October 31 to November 19, 2026) on November 21, 2026.
The crosshair system and share code changes come from Valve's release notes. Pro values come from ProSettings.net, which shows each player's crosshair along with the match it was taken from. ProSettings.net does not publish share code strings for pros, and the code lists on other sites often still show pre-update codes, so this guide gives values and console lines instead of unverified codes. Reports about old codes failing come from press coverage and player reports, not from Valve.
Which CS2 crosshair codes do pros use right now?
Almost every top pro uses a Static Cross with short lines, a 1 to 2 pixel gap, no dot and no outline, usually in green, cyan or yellow. The table shows each player's current crosshair as listed on ProSettings.net on November 21, 2026.
| Player (team) | Style | Length / Thickness / Gap (px) | Color (RGB) | Set at screen height |
|---|---|---|---|---|
| donk (Team Spirit) | Static Cross | 2 / 2 / 1 | Green (0, 255, 0) | 960 |
| ZywOo (Team Vitality) | Static Cross | 3 / 2 / 2 | Cyan (0, 255, 223) | 960 |
| m0NESY (Falcons Esports) | Static Cross | 4 / 1 / 2 | Yellow (255, 255, 0) | 960 |
| NiKo (Falcons Esports) | Static Cross | 3 / 1 / 1 | Green (0, 255, 145) | 960 |
| ropz (Team Vitality) | Static Cross | 4 / 1 / 2 | Green (0, 255, 0) | 1080 |
| sh1ro (Team Spirit) | Static Cross | 2 / 2 / 1 | Green (0, 255, 0) | 960 |
| s1mple (BC.Game) | Static Cross | 2 / 2 / 1 | Yellow (255, 255, 0) | 960 |
| b1t (Natus Vincere) | Static Cross | 2 / 2 / 1 | Green (0, 255, 0) | 960 |
| kyousuke (Falcons Esports) | Static Cross | 2 / 2 / 2 | Cyan (0, 255, 255) | 960 |
| Twistzz (FaZe Clan) | Static Cross | 8 / 3 / 3 | Green (0, 255, 135) | 1080 |
| flameZ (Team Vitality) | Dynamic Cross (Legacy/Shot Feedback), dot on | 3 / 1 / 2 | Cyan (0, 229, 255) | 960 |
flameZ is the only player in the table on a dynamic style with a dot; everyone else is on Static Cross with outlines off. Sizes are pixel values at the screen height in the last column, which matters for copying (see below). Twistzz looks very different on paper (8 / 3 / 3) because his values were set at 1080 pixels tall and his crosshair is also simply larger than most.
The match each crosshair was taken from, per ProSettings.net: donk and sh1ro from Spirit vs FURIA and NiKo, m0NESY and kyousuke from FURIA vs Falcons, both at BLAST Rivals 2026 Season 2; ZywOo, ropz and flameZ from Vitality vs MOUZ at the same event; b1t from IEM Beijing 2026; s1mple from a HyperX Retake Season 13 match; and Twistzz from the PGL Cluj-Napoca 2027 Closed Qualifier.
How do you copy a pro crosshair in CS2 with console commands?
Pick the matching style in the Crosshair/Scopes tab, then paste a console line with the pro's length, thickness, gap and color. The command names below are the ones ProSettings.net uses for each crosshair field.
- donk (set at 960p): cl_crosshair_length 2; cl_crosshair_thickness 2; cl_crosshair_gap 1; cl_crosshaircolor_r 0; cl_crosshaircolor_g 255; cl_crosshaircolor_b 0; cl_crosshairdot 0; cl_crosshair_drawoutline 0
- ZywOo (set at 960p): cl_crosshair_length 3; cl_crosshair_thickness 2; cl_crosshair_gap 2; cl_crosshaircolor_r 0; cl_crosshaircolor_g 255; cl_crosshaircolor_b 223; cl_crosshairdot 0; cl_crosshair_drawoutline 0
- m0NESY (set at 960p): cl_crosshair_length 4; cl_crosshair_thickness 1; cl_crosshair_gap 2; cl_crosshaircolor_r 255; cl_crosshaircolor_g 255; cl_crosshaircolor_b 0; cl_crosshairdot 0; cl_crosshair_drawoutline 0
- NiKo (set at 960p): cl_crosshair_length 3; cl_crosshair_thickness 1; cl_crosshair_gap 1; cl_crosshaircolor_r 0; cl_crosshaircolor_g 255; cl_crosshaircolor_b 145; cl_crosshairdot 0; cl_crosshair_drawoutline 0
- s1mple (set at 960p): cl_crosshair_length 2; cl_crosshair_thickness 2; cl_crosshair_gap 1; cl_crosshaircolor_r 255; cl_crosshaircolor_g 255; cl_crosshaircolor_b 0; cl_crosshairdot 0; cl_crosshair_drawoutline 0
Enable the developer console in the Game settings first, then paste the full line and press Enter. Set the style (Static Cross for all five above) in the menu, since the style dropdown is the easiest place to confirm it. When the crosshair looks right, export it from the Crosshair/Scopes tab to get a share code in the current format that you can keep or send to friends.
If you play at a different resolution from the pro, scale the numbers. Valve's own example: a crosshair set at 1280x720 with thickness 2 is automatically rescaled to thickness 4 at 2560x1440 so it keeps the same proportions. So donk's length 2 at 960 pixels tall looks the same as roughly length 2.25 at 1080, which rounds to 2.
How do you import and share CS2 crosshair codes?
Open Settings, go to the Crosshair/Scopes tab, paste the code into the share code box and confirm. To share yours, use the same box to copy your current code.
- Copy the whole code with no spaces before or after it.
- In CS2, open Settings and select the Crosshair/Scopes tab (added on September 22, 2026).
- Use the Share or Import option at the top of the crosshair settings and paste the code.
- Check the preview, which shows the crosshair over a map background and a player model.
- Fine-tune the length, thickness and gap sliders if needed, then copy the code again as your own backup.
Since September 30, 2026, a share code also stores your scope dot size and scope dot color, so one code restores both your crosshair and your scoped look. Codes made before that date cannot contain those two settings.
Do old CSGO- crosshair codes still work in CS2?
Often not. Valve changed the share code format on September 30, 2026 to fit the new settings, and press reports say several older pro codes, including codes listed for donk, ZywOo and ropz, give import errors in the updated client.
Even when an old code imports, the result can look off, because the old size and thickness values were measured in fractions of screen height (1/480ths, according to a community converter's documentation) rather than pixels. Community tools exist that convert old codes or old console values into the new pixel format, but Valve has not released one. The safest fixes are:
- Use current values: copy the length, thickness, gap and color from a pro settings page updated after September 2026.
- Rebuild your own: set the sliders at your normal resolution, then export a fresh code.
- Check the date: treat any crosshair list last updated before September 22, 2026 as outdated.
What do the CS2 crosshair settings mean?
Length, thickness and gap are now plain pixel counts, style decides whether the crosshair moves, and color and outline decide visibility. Valve's example: thickness 1, length 8 and gap 4 gives a 1-pixel-wide crosshair with 8-pixel bars and a 4-pixel gap.
| Setting | What it does |
|---|---|
| Style | Static styles never move; dynamic styles show real weapon spread and inaccuracy. The default is Dynamic Quad |
| Length | Bar length in pixels |
| Thickness | Bar width in pixels |
| Gap | Space between the bars and the center, in pixels; negative gaps are allowed on the classic dynamic style |
| Dot | Adds a center dot; off for almost every pro in the table |
| Outline | Dark border for contrast; half-outlines (top-left only) and a custom outline color were added in September 2026 |
| Color and Opacity | RGB color and transparency of the bars |
| Follow Recoil | Moves the crosshair with recoil; off for every pro listed |
| T Style | Removes the top bar |
| Dynamic Spread Limit | Caps how far a dynamic crosshair can spread; the baseline distance is 64 pixels |
| Screen Height | The resolution height the crosshair was set at, used to rescale it on other resolutions |
| Scope Dot Scale and Color | Size and color of the dot in scoped weapons, now saved in share codes |
The style list in current tools includes Dynamic Cross, Dynamic Circle, Dynamic Cross (Classic), Static Circle, Static Cross, Dynamic Cross (Legacy/Shot Feedback), Dot Only, Dynamic Quadrant, Static Square and Static Quadrant. Static Square arrived on September 23 and Static Quadrant on September 30.
What crosshair color is best in CS2?
Green and cyan are the most common pro choices because they stand out against the brown, gray and white surfaces on most maps. Yellow, used by m0NESY and s1mple, is the main alternative.
A community database of 809 pro share codes (csdb.gg, data as of November 16, 2026) shows the same trend: 30% of pros use the preset green, 25% cyan, 7% yellow and 38% a custom RGB value, while red and blue are almost never used. Only 8% of pros in that data use an outline and 8% a center dot. Pick a color that does not blend into snowy textures or the bright walls of your most played maps.
Is there a grenade crosshair or new scope option?
Yes. Since September 30, 2026, holding any grenade attack button during freeze time shows the grenade crosshair, which helps line up smokes thrown the moment the round starts. Grenade and sniper scope options have their own panels in the Crosshair/Scopes tab.
An October 2 fix corrected the grenade crosshair when thickness is set to 3 pixels, and the same patch added the new crosshair settings to the workshop convar whitelist. Sniper Width controls the width of the scope lines on sniper rifles; kyousuke sets it to 1. For video, audio and launch options that pair with these crosshairs, see the best CS2 settings and launch options guide.
The latest update on November 19, 2026 did not touch crosshairs; it fixed Cobblestone map issues, updated the AWP slow reload animation and added the X-Ray Scanner for players in Switzerland.
Related guides
FAQ
Why does my CS2 crosshair code say invalid?
The code is probably from before Valve changed the share code format on September 30, 2026, or it was copied with extra spaces. Enter the values by hand or with console commands, then export a fresh code.
What is the default crosshair in CS2?
Dynamic Quad, since the September 22, 2026 update. It shows your weapon's real spread and inaccuracy; most pros switch to Static Cross.
What crosshair does donk use in CS2?
A green Static Cross with length 2, thickness 2 and gap 1, no dot and no outline, set at a screen height of 960, according to ProSettings.net on November 21, 2026.
Why did my CS2 crosshair change size after the update?
Valve moved crosshair sizes to pixels on September 22, 2026. Old values were scaled differently, so rebuild the crosshair at your normal resolution and save a new code.
Does changing resolution change my CS2 crosshair?
It rescales automatically. Valve's example is a thickness of 2 set at 1280x720 becoming 4 at 2560x1440, so the crosshair keeps the same proportions on screen.
What does crosshair screen height mean in CS2?
It is the vertical resolution the crosshair was set at. Pro values are in pixels at that height, so if you play at a different resolution, scale them proportionally.
Can I see the grenade crosshair before the round starts?
Yes. Since September 30, 2026, holding a grenade attack button during freeze time shows the grenade crosshair, which helps with smokes thrown at round start.
Sources
- Valve: Counter-Strike 2 Update, September 22, 2026
- Valve: Counter-Strike 2 Update, September 23, 2026
- Valve: Counter-Strike 2 Update, September 30, 2026
- Valve: Counter-Strike 2 Update, October 2, 2026
- Valve: Counter-Strike 2 Update, November 19, 2026
- ProSettings.net: donk CS2 settings
- ProSettings.net: ZywOo CS2 settings
- ProSettings.net: m0NESY CS2 settings
- ProSettings.net: NiKo CS2 settings
- ProSettings.net: ropz CS2 settings
- ProSettings.net: sh1ro CS2 settings
- ProSettings.net: s1mple CS2 settings
- ProSettings.net: b1t CS2 settings
- ProSettings.net: Twistzz CS2 settings
- ProSettings.net: kyousuke CS2 settings
- ProSettings.net: flameZ CS2 settings
- ProSettings.net: CS2 crosshair generator
- csdb.gg: Most-used pro crosshair codes, colors and settings
- Pley.gg: Valve resets CS2 crosshairs in new update, how to rebuild your settings
- horizzon1: CS2 crosshair migrator (community tool documentation)
See our editorial policy.



