Key takeaways
- Patch 13.10 (November 10, 2026) added a Replay Bookmarking keybind but no video setting changes (Riot Games)
- Valorant has run on Unreal Engine 5.3 since patch 11.02 on July 29, 2025 (Riot Games)
- Riot's 144 FPS tier pairs an i5-9400F or Ryzen 5 2600X with a GTX 1050 Ti, R7 370 or Arc A310 (Riot Games)
- Raw Input Buffer gives a minor performance gain with identical input latency and supports 8000Hz polling rate mice (Riot Games)
- Average pro eDPI is 267 and the median is 240, with 79% of pros on a 1.00 scoped multiplier (ProSettings.net)
- Recommended graphics: Material and Detail Low, Texture Medium, MSAA 2x, Anisotropic 4x, Bloom and Vignette off (ProSettings.net)
The Valorant best settings for most PC players are Fullscreen at your monitor's native resolution, Multithreaded Rendering on, Material and Detail Quality on Low, Texture Quality on Low or Medium, and Vignette, V-Sync, Bloom, Distortion and Cast Shadows off, with NVIDIA Reflex Low Latency on if your card supports it. For aim, pros sit around 240 to 267 eDPI with a scoped multiplier of 1, and nearly all of them play on 144Hz or faster monitors. None of the patches from 13.06 to the current 13.10 changed the video menu, so these values still apply. This guide covers graphics, FPS limits, PC requirements, mouse and eDPI, minimap, audio and what recent patches changed.
Checked against Riot's VALORANT patch notes 13.10 (November 10, 2026), Riot's PC requirements page and ProSettings.net's Valorant settings guide and pro list on November 21, 2026.
Setting recommendations come from two settings guides: ProSettings.net, which bases its guide on 707 pro players (last modified May 18, 2026), and an esports.net guide from February 2026. Where they disagree, both values are given. Pro sensitivity figures are community data from ProSettings.net, not official Riot statistics. Crosshairs are covered separately in the Valorant crosshair codes guide.
What are the Valorant best settings for graphics quality?
Set the heavy options (Material, Detail, Vignette, Bloom, Distortion, Cast Shadows) to Low or Off and keep the ones that help clarity, such as Improve Clarity and light anti-aliasing. Valorant has run on Unreal Engine 5.3 since patch 11.02 (July 29, 2025), and Riot's patch notes from 13.06 to 13.10 list no changes to these options.
| Setting (Video, Graphics Quality) | Recommended | Why |
|---|---|---|
| Multithreaded Rendering | On | Recommended by esports.net; turn it off only if your frame rate gets less stable |
| Material Quality | Low | High performance cost, little competitive value |
| Texture Quality | Medium (Low on weak PCs) | ProSettings.net suggests Medium; esports.net suggests Low unless FPS stays the same |
| Detail Quality | Low | Higher settings add clutter such as vines on plain walls |
| UI Quality | Low or Medium | Little effect on FPS or visuals either way |
| Vignette | Off | Darkens the screen edges and reduces clarity |
| VSync | Off | Can add input lag |
| Anti-Aliasing | MSAA 2x (None for max FPS) | Smooths edges at a small cost |
| Anisotropic Filtering | 4x (2x also fine) | Very small difference in FPS |
| Improve Clarity | On | Small visual gain; turn off if FPS drops |
| Experimental Sharpening | Test both | ProSettings.net says On, esports.net says Off; it is a beta option |
| Bloom | Off | Eye candy only |
| Distortion | Off | Warps the image around some effects |
| Cast Shadows | Off | Only affects your own character and viewmodel |
If your PC is strong, the only settings worth raising for looks are Texture Quality and Anti-Aliasing. The rest either cost frames or make the screen busier without helping you spot enemies.
Which Video settings give the most FPS in Valorant?
Fullscreen mode, native resolution, Reflex on and sensible frame limits matter most. These sit in the General section of the Video tab, above the graphics options.
| Setting (Video, General) | Recommended |
|---|---|
| Display Mode | Fullscreen |
| Resolution | Native (1920x1080 if the game is unstable) |
| Aspect Ratio Method | Fill |
| Limit FPS on Battery | On, 60 (laptops) |
| Limit FPS in Menus | On, 60 |
| Limit FPS in Background | On, 30 |
| Limit FPS Always | Off, or a cap 3 below your refresh rate (141 for 144Hz, 237 for 240Hz) |
| NVIDIA Reflex Low Latency | On |
The menu and background caps stop the GPU from running flat out while you sit in the lobby or alt-tab, which keeps temperatures and fan noise down. Leave Limit FPS Always off if your frame rate already sits well above your refresh rate; use the cap if your frame rate swings a lot or you want lower temperatures.
Can your PC run Valorant at 144 FPS?
Riot rates a GTX 1050 Ti, Radeon R7 370 or Intel Arc A310 with an i5-9400F or Ryzen 5 2600X as its high-end tier for 144 FPS. The minimum tier targets 30 FPS on integrated graphics.
| Tier (Riot target) | CPU | GPU |
|---|---|---|
| Minimum (30 FPS) | Intel i3-540 or AMD Athlon 200GE | Intel HD 4000 or AMD Radeon R5 220 |
| Recommended (60 FPS) | Intel i3-4150 or AMD Ryzen 3 1200 | NVIDIA GeForce GT 730 or AMD Radeon R7 240 |
| High-end (144 FPS) | Intel i5-9400F or AMD Ryzen 5 2600X | NVIDIA GTX 1050 Ti, AMD Radeon R7 370 or Intel Arc A310 |
Riot's minimum also lists 4GB of RAM, at least 1GB of VRAM on a discrete card, a CPU with SSE 4.2 or AVX support and 64-bit Windows 10 (build 19041 or newer) or Windows 11. On Windows 11, Riot also requires TPM 2.0 and UEFI Secure Boot. ARM CPUs, virtual machines and cloud gaming are not supported. If you are near the minimum, the graphics table above matters more than any single tweak: drop Texture Quality to Low and set Anti-Aliasing to None before lowering resolution.
What sensitivity and eDPI do Valorant pros use?
ProSettings.net puts the average pro eDPI (DPI multiplied by in-game sensitivity) at 267 and the median at 240, which works out to about 45 cm of mouse movement for a full 360-degree turn. Very few pros go above 1600 DPI.
A count of the 100 players shown on ProSettings.net's Valorant pro list on November 21, 2026 gives a similar picture: an average of 252 eDPI and a median of 216, with 83 of the 100 between 150 and 350. In that list, 57 players use 800 DPI, 28 use 1600 and 9 use 400. These are community-tracked numbers and change as players update their setups.
| Player (team) | DPI | Sensitivity | eDPI |
|---|---|---|---|
| TenZ (T1) | 1600 | 0.14 | 224 |
| aspas (MIBR) | 800 | 0.4 | 320 |
| Zekken (MIBR) | 1600 | 0.175 | 280 |
| t3xture (Gen.G) | 800 | 0.45 | 360 |
| benjyfishy (Team Heretics) | 800 | 0.27 | 216 |
| kiNgg (Leviatan) | 1600 | 0.1 | 160 |
| f0rsakeN (Paper Rex) | 800 | 0.55 | 440 |
Other mouse settings pros agree on:
- Scoped Sensitivity Multiplier: 1. ProSettings.net reports that 79% of pros use exactly 1.00, so scoped and unscoped aim feel the same.
- DPI: 800 or 1600 is the norm. A higher DPI with a lower in-game sensitivity gives the same eDPI.
- Raw Input Buffer: On. Riot added it in patch 3.07 and said it gives a minor performance improvement with identical input latency, and a major improvement with 8000Hz polling rate mice, which Riot says are supported with it enabled.
If you are well above 400 eDPI and keep overshooting heads, lower your sensitivity in small steps until you can stop your crosshair on a target without correcting.
What are the best minimap settings in Valorant?
Turn Keep Player Centered off, size and zoom the map so you can see the whole layout, and turn vision cones on. The two guides split on rotation, so pick the style that reads faster for you.
| Setting (General, Map) | Recommended | Note |
|---|---|---|
| Rotate | Fixed or Rotate | esports.net uses Fixed with Fixed Orientation set to Always the Same; ProSettings.net prefers Rotate |
| Keep Player Centered | Off | Shows more of the map instead of the area behind you |
| Minimap Size | 1.05 to 1.20 | Large enough to read callouts |
| Minimap Zoom | 0.85 to 1.00 | Fits the whole map or at least the main sites |
| Minimap Vision Cones | On | Shows where teammates are looking, though cones can mislead |
| Show Map Region Names | Always | Helps learn callouts on new maps |
A fixed map keeps every site in the same place on screen, which makes rotations easier to read. A rotating map matches your view, which some players find quicker in fights. Try one for a week before switching.
What audio settings help you hear footsteps in Valorant?
Enable HRTF and turn off any virtual surround software in Windows or your headset app. HRTF was added in patch 2.06 and improves how accurately you can place sounds.
- HRTF: On, with headphones.
- Virtual surround and 3D audio tools: Off, since they can interfere with HRTF.
- All Music Master Volume: Off, in the Sounds tab, so music never covers footsteps.
- Agent Flavor: Off, in the Voice-Over tab, to cut chatter that adds no information.
What resolution and refresh rate do Valorant pros use?
Most pros play at 1920x1080 on a 240Hz or faster monitor. ProSettings.net found that 68% use 1920x1080 and that none of the pros it tracks plays below 144Hz.
| Monitor refresh rate | Share of pros |
|---|---|
| 360Hz or higher | 47% |
| 240Hz | 33% |
| Other | 20% |
Stretched resolutions such as 1280x960 appear in some pro setups (14 of the 100 players in the current list), but ProSettings.net notes they give no real advantage in Valorant, unlike in Counter-Strike. Lower the resolution only if you cannot reach a stable frame rate any other way.
Did patch 13.10 change any Valorant settings?
Patch 13.10 (November 10, 2026) added one new keybind and no video changes. You can now bind Replay Bookmarking in Settings, Controls, Interface, or add bookmarks from the Options Menu in a match, and the bookmarks are visible only to you.
The same patch fixed Sage's crosshair, which now stays visible while targeting with Healing Orb. Patch 13.06 (September 22, 2026) merged the Home and Lobby screens into one hub and rebuilt global navigation, so some menus moved, while patches 13.08 and 13.09 left settings alone apart from bug fixes. Patch 11.02 moved the game to Unreal Engine 5.3 with small performance improvements and roughly halved the install size.
With settings done, the Valorant agent tier list for patch 13.10 covers which agents are strongest right now.
Related guides
FAQ
Does Multithreaded Rendering increase FPS in Valorant?
It is recommended On in current settings guides, and on most PCs it is the faster choice. If your frame rate becomes less stable after enabling it, switch it off and compare in the Range.
Should I turn on Raw Input Buffer in Valorant?
Yes for most players. Riot says it gives a minor performance improvement with identical input latency, a major improvement with 8000Hz polling rate mice, which are supported with it enabled.
What is a good eDPI for Valorant?
Most pros sit between about 150 and 350 eDPI. ProSettings.net lists an average of 267 and a median of 240, so starting near 250 and adjusting from there is reasonable.
Is stretched resolution better in Valorant?
No. ProSettings.net notes stretched resolutions give no real advantage in Valorant, and 68% of the pros it tracks play at 1920x1080. Lower the resolution only if you cannot hold a stable frame rate.
Can a low-end PC run Valorant?
Yes. Riot's minimum tier targets 30 FPS on an Intel i3-540 or Athlon 200GE with Intel HD 4000 or Radeon R5 220 graphics, 4GB of RAM and Windows 10 build 19041 or newer.
Why does Valorant need TPM 2.0 on Windows 11?
Riot lists TPM 2.0 and UEFI Secure Boot as requirements on Windows 11. If the game will not launch, check that both are enabled in your BIOS or UEFI settings.
Should I cap my FPS in Valorant?
Cap the menus at 60 and the background at 30 to save power. During matches, leave the cap off or set it about 3 below your refresh rate, such as 237 on a 240Hz monitor.
Sources
- Riot Games: VALORANT Patch Notes 13.10
- Riot Games: VALORANT Patch Notes 13.06
- Riot Games: VALORANT Patch Notes 11.02
- Riot Games: VALORANT Patch Notes 3.07
- Riot Games Support: VALORANT minimum and recommended PC specs
- Riot Games: VALORANT game updates
- ProSettings.net: VALORANT Best Settings and Options Guide
- ProSettings.net: VALORANT pro settings list
- esports.net: Best VALORANT Settings (2026)
See our editorial policy.



